Contemptor Re-pose

At the suggestion of MiniWarBlog in my comments I reposed the contemptor's torso and assault cannon.  To get a minimal cut I used a sharp exacto knife rather than the razor saw.  The saw would have cut out about 1mm out, and I didn't want to build a spacer.  So I rotated the torso slightly and did the same with the weapon arm to give a slightly more dynamic pose.

Here's a look at the top half of the torso after cutting:

And the legs :

Here's the Assault Cannon rotated:

Pro tip, drill pilot holes with a small drill and expand them with the right size bit (I'll use 1/8" magnets).

Cut out the character:

 And assembled: